软件安装注意：
如果是 .ISO 或 .RAR 文件则必须按右键正常解压到指定磁盘目录后，进入指定磁盘目录，点击 setup.exe 安装软件。

光盘中包括以下文件和目录:
setup.exe           -------- "智能血氧探头数据管理系统"(三语言版本)安装程序
setup_usb.exe       -------- USB驱动安装程序
USB                 -------- 此目录含有USB驱动程序
English             -------- 此目录含有"智能血氧探头数据管理系统"安装程序 
OSDDLNote.txt       -------- 版本注释
readme.txt          -------- 此文件

提示:
对“管理系统”软件进行版本升级前需卸载原安装程序,并删除原安装文件夹下所有文件。
例如：“管理系统”软件安装在“C:\OxiSensor Demonstrator and Data Logger”文件夹下，则先在
“控制面板->添加/删除程序”中卸载“OxiSensor Demonstrator and Data Logger" 程序，然后手工
删除“C:\OxiSensor Demonstrator and Data Logger”文件夹下所有内容（原来的记录数据亦会被删掉），
接下来安装新版“管理系统”软件.

    安装前必须拨掉电脑的 USB 线。当安装软件时系统自动安装 PL2303 USB_to_Serial 的驱动程序。


Installation Guide for PC Software:
  If the PC software is provided with a single file (not a CD-ROM disk) with the extension name of "ISO" or "RAR", that
  means it is a compressed image or package file, you should decompress this single file at first. Normally you can right
  -click this file by mouse and then select decompressing option to unzip it into a given file folder. 
  After Decompression, go to the file folder you just unzipped, and find the executable file with name "setup.exe", 
  then click it to install the software.

This CD includes the following files and folders:
setup.exe           -------- Installation program for "OxiSensor Demonstrator and Data Logger" (for all language  
                             versions)
setup_usb.exe       -------- Installation program for the driver of USB data cable
USB                 -------- Directory containing the driver of USB data cable
English             -------- Directory containing Installation program for "OxiSensor Demonstrator and Data Logger"
OSDDLNote.txt       -------- Release Notes
readme.txt          -------- This file.
Note:
Before updating the "OxiSensor Demonstrator and Data Logger" software, please uninstall the previous "OxiSensor 
Demonstrator and Data Logger" procedure,and manually delete all the files in the default folder ("C:\OxiSensor 
Demonstrator and Data Logger") or your destination folder for saving "OxiSensor Demonstrator and Data Logger" installing 
files, the previous data will also be deleted .

  Please note that the USB data cable should be disconnected from PC before installing the PC software. After the 
  installation of PC software is finished, the system will automatically start to install the 
  PL2303 USB_to_Serial driver for the data cable. 


軟件安裝注意：
如果是 .ISO 或 .RAR 文件則必須按右鍵正常解壓到指定磁盤目錄后，進入指定磁盤目錄，點擊 setup.exe 安裝軟件。

光盤中包括以下文件和目錄:
setup.exe           -------- "智能血氧探頭數據管理系統"(三語言版本)安裝程序
setup_usb.exe       -------- USB驅動安裝程序
USB                 -------- 此目錄含有USB驅動程序
English             -------- 此目錄含有"智能血氧探頭數據管理系統"安裝程序
OSDDLNote.txt       -------- 版本注釋
readme.txt          -------- 此文件

提示:
對“管理系統”軟件進行版本升級前需卸載原安裝程序,并刪除原安裝文件夾下所有文件。
例如：“管理系統”軟件安裝在“C:\OxiSensor Demonstrator and Data Logger”文件夾下，則先在
“控制面板->添加/刪除程序”中卸載“OxiSensor Demonstrator and Data Logger" 程序，然后手工
刪除“C:\OxiSensor Demonstrator and Data Logger”文件夾下所有內容（原來的記錄數據亦會被刪掉），
接下來安裝新版“管理系統”軟件.

    安裝前必須撥掉電腦的 USB 線。當安裝軟件時系統自動安裝 PL2303 USB_to_Serial 的驅動程序。
    