CO2 Incubator is a device for culturing cells/tissues in vitro by simulating the growth environment in the organism. In order to ensure the smooth development of research work, CO2 Incubator needs to achieve stable control of temperature, carbon dioxide concentration and humidity, while ensuring that the culture samples are not contaminated by microorganisms. Due to the user's laboratory environment and unconscious and irregular operation of the operator, the incubator will often be polluted. This is a headache for many laboratory managers. For this reason, Heal Force will launch HF180 CO2 Incubator to escort cell culture.
High temperature and dry heat rapid sterilization, sterilization time <2 hours (the entire sterilization cycle is 12 hours)
Equipped with a HEPA filter, it can provide a clean culture environment in the cabinet, and the interception rate for particles and microorganisms ≥0.3um diameter is ≥99.95%, suitable for non-clean laboratory environment and users who frequently open and close doors.
Forced convection, three-dimensional circulating air duct, double-door detection switch, provide a uniform temperature, CO2 concentration and humidity environment in the box.
The chassis reservoir design, the humidification speed is fast, the humidity in the box is high, the humidity recovery speed after opening the door 30 seconds is faster than the traditional humidification pan design, it has a fast drainage design, only need to plug in the hose, and drain the water in the reservoir without additional operation.
The host has its own data storage function, equipped with USB, RS232 interface and other output functions, which can be directly connected to the Biolab laboratory IoT cloud platform system to realize remote monitoring of equipment, remote equipment management, abnormal information query and remote alarm, data storage and log recording and other functions, provide worry-free use.